Description:
The Cartridge assembly consists of plates, perforated screens, spacers and fitter media. Interlocking spacers internally form single pipeline. The unfiltered liquid is centrally fed under pressure from bottom inlet. The liquids spreads out equally on each plate fitted with filter media. Solids remain on filter media and clear. filtrate flows through precisely made holes on sides of plates and collects in the shell, which then comes out through the outlet. In this process, solids are evenly distributed on each plate. The cake is then cleaned from the filter material and used again for filtration process.
Single pass filtration with no solid bypass
Full batch recovery, no separate scavenging system needed.
Proper sealing which allows the filtration of volatile, toxic and inflammable products.
Plate pack arrangement ensures :
Any type of filtering media singularly or in combination can be used to achieve required micron efficiency.
Easy removal and cleaning of the Cartridge Assembly.
Closed System ensures :
Filtration of toxic, hazardous, explosive materials.
Efficiently cleaned and sterilized.
Central feeding ensures
No solid inside the vessel, complete recovery of liquids.
Cake solids can be maximum dried with N2
Complete cake retains over the plate.
Uniform filter-aid bed can be formed.
Reduces the cost of expensive solvents.
Optional Available:
Built In Stirrer Arrangement with Lifting and Lowering Device.
Steam Fittings with All Connections Factory Fitted.
Non Tilting Type With Bottom Discharge Models Are Also Available.
Capacities Available: From 10 Ltrs to 2000 Ltrs Capacity.
Functions:
Basically this unit is used for preparation of starch paste. Hemispherical shape ensures that the heating of the starch paste is uniform and gets more surface area. The tilting type arrangement ensures ease in unloading the paste into any container or vessel. The starch is put in the kettle and water is added till desired thickness is achieved. The kettle is jacketed and is heated till the starch melts and a thick paste is achieved. This paste can be agitated either manually or with the help of an anchor type agitator which will constantly stir the paste so that there will no lumps formation and proper mixing is achieved. Temperature can be set to desired temp by adjusting the thermostat provided and the temperature can be seen in the dial thermometer provided.
Salient Features:
Entire construction in Stainless steel
Semi hemispherical bowl ensure that entire bowl can be emptied by rotating the worm wheel.
Simplified construction enables ease of operation.
Steam or electric heating is possible depending upon the user requirements.
When used with stirrer / anchor the movement of anchor is forward and reverse using cyclic timer. Stirrer can be supplied at additional cost.
When supplied with stirrer, there is a top entry drive without using any "V" belt. Stirrer can also be removed for cleaning. Temperature indication is possible at additional cost.
Technical Details: :
Types
Diameter of Plate
No. of Plates Filtering Area M2 Cake Holding Capacity Ltrs. Capacity Ltr / Hr
SB 8x6 8" 6 0.198 4.50 400
SB 8x8 8" 8 0.254 5.78 500
SB 14x8 14" 8 0.756 27.00 1500
SB 14x10 14" 10 0.924 35.00 1800
SB 18x8 18" D 8 1.270 51.00 2500
SB 18x15 18" S 15 2.270 44.00 4500
SB 18x12 18" D 12 1.840 78.00 3700
SB 18x23 18" S 23 3.400 65.00 6800
SB 24x12 24" D 12 3.430 148.00 6700
SB 24x23 24" S 23 6.336 120.00 12600
SB 33x7 33" D 7 4.000 175.00 8000
SB 33x14 33" S 14 7.500 210.00 15000
The values of "Flow-Rates" mentioned in technical specifications have been estimated for the following operating parameters:
Fluid : Water
Insoluble : Carbon
Filter media: Non-woven polypropylene cloth of 418 grades.
Carbon loading: 5 Kg/m2 filtration area
